PC-502 Module Product Guide
Rev. 1.6 Date 3/17/2017
2
Overview and
General Concepts
The INNCOM PC-502 wall mounted module can be used to expand the range
of an RF network or to provide the protocol gateway from INNCOM S5bus to RF
protocol.
The PC-502 can be combined with the B485 (01-9489) to provide RS485 to
Deep Mesh RF protocol conversion. This application is ideal for INNCOM
Central Electronic Lock System (CELS) integrations and for applications where
signal conversion between an RS485 and RF networks are required for
backhauling guestroom data towards the network backbone.
In an in-room RF network, the PC502 provides S5bus to RF protocol
conversion, giving any INNCOM product participating in the INNCOM Integrated
Room Automation System (IRAS) an RF transceiver for control of wireless
products in the guestroom.
In the Deep Mesh 802.15.4 network, the PC-502 is designed to patch areas
within the network where signal strength is lost due to distance limitations or
interference. It also serves to create multiple pathways, increasing the
redundancy of the mesh communications to ensure maximum network
reliability.
Features
•
Small wall mountable form
•
2.4Ghz IEEE 802.15.4 compliant RF transceiver
•
Medium and long range variants available
•
Industrial temperature ratings 0–65 degrees C
•
FCC Part 15b listed
Figure 1 PC-502 Wall Mounted Module
