68-0173—3
30
10. Programming the System Setting
a. Press SYSTEM until desired setting (
HEAT, OFF,
COOL, AUTO, EM HEAT) is displayed.
HEAT:
The Comfort Center™ program controls the
heating system.
OFF:
Both the heating and cooling systems are off.
OFF flashes in the display.
COOL:
The Comfort Center™ program controls the
cooling system.
AUTO:
The Comfort Center™ program automatically
changes between heating and cooling,
depending on the indoor temperature. (AUTO
must be configured by the installer.)
EM HEAT: (Select Models Only): The Comfort Center™
program controls only the emergency heat.
11. Programming Humidity Setting
a. Press HUMIDITY. The display shows
HUMID with a
percentage.
b. Press and hold the up or down arrowhead key until
desired humidity setting is displayed. The available
choices range from 10 to 80 percent in 5 percent
increments.
12. Programming Frost Setting (If Applicable)
a. Press HUMIDITY a second time and the display
shows
FROST.
NOTE:
The factory setting is 5, but the range is 0 to
10. When there is too much condensation,
lower the number but if the air is dry, change
the setting to a higher number.
b. Press up or down arrowhead key until the desired
setting is displayed.
c. Press RUN to exit the program mode.
The Comfort Center™ program is now customized.
Operating the Comfort Center™ Control
System
Changing Current Period Settings
Temporary changes to the current period allow for those times
when someone comes home early, stays up late, or plans an
evening out. The settings are in effect until the next regularly
scheduled period starts.
1. Temperature Setpoint
a. Press HEAT/COOL SETPOINTS to display either
HEAT SET PT (if changing heat setpoint) or COOL
SET PT (if changing cool setpoint).
b. Press and hold up or down arrowhead key until the
desired temperature is displayed.
2. Fan Setting
a. Press FAN to display the
AUTO, ON or CIRC fan
setting, as desired.
3. Ventilation Setting
a. Press VENTILATE to display
VENT or not, as
desired.
Changing Settings for One Week or Less
This feature allows setting one temperature that the Comfort
Center™ program holds continuously for up to one week, until
the day and time programmed.
M6227
CHECK
SET
CLOCK
HEAT/COOL
SETPOINTS
SELECT
PERIOD
CANCEL
HOLD
HUMIDITY
VENTILATE
RUN
SYSTEM
HEAT OFF COOL
FAN
AUTO ON CIRC
DAY
TIME
TIME
SYSTEM
SYSTEM
HEAT OFF COOL
SYSTEM
M6228
CHECK
SET
CLOCK
HEAT/COOL
SETPOINTS
SELECT
PERIOD
CANCEL
HOLD
HUMIDITY
HUMIDITY
VENTILATE
RUN
SYSTEM
HEAT OFF COOL
FAN
AUTO ON CIRC
DAY
TIME
TIME
SYSTEM
M6229
CHECK
SET
CLOCK
HEAT/COOL
SETPOINTS
SELECT
PERIOD
CANCEL
HOLD
HUMIDITY
VENTILATE
RUN
SYSTEM
HEAT OFF COOL
FAN
AUTO ON CIRC
DAY
TIME
TIME
SYSTEM
M6239
CHECK
SET
CLOCK
HEAT/COOL
SETPOINTS
SELECT
PERIOD
CANCEL
HOLD
HUMIDITY
HUMIDITY
VENTILATE
RUN
SYSTEM
HEAT OFF COOL
FAN
AUTO ON CIRC
DAY
TIME
TIME
SYSTEM
CHECK
SET
CLOCK
HEAT/COOL
SETPOINTS
SELECT
PERIOD
CANCEL
HOLD
HUMIDITY
VENTILATE
RUN
SYSTEM
HEAT OFF COOL
FAN
AUTO ON CIRC
DAY
TIME
TIME
SYSTEM
M6240
M6230
CHECK
SYSTEM
SET
CLOCK
HEAT/COOL
SETPOINTS
SELECT
PERIOD
CANCEL
HOLD
HUMIDITY
VENTILATE
RUN
SYSTEM
HEAT OFF COOL
FAN
AUTO ON CIRC
DAY
TIME
TIME
RUN
AM
MON
M6209
CHECK
SET
CLOCK
HEAT/COOL
SETPOINTS
HEAT/COOL
SETPOINTS
SELECT
PERIOD
CANCEL
HOLD
HUMIDITY
VENTILATE
RUN
SYSTEM
HEAT OFF COOL
FAN
AUTO ON CIRC
DAY
TIME
TIME
SYSTEM
HEAT SET PT COOL
M6216
CHECK
SET
CLOCK
HEAT/COOL
SETPOINTS
SELECT
PERIOD
CANCEL
HOLD
HUMIDITY
VENTILATE
RUN
SYSTEM
HEAT OFF COOL
FAN
AUTO ON CIRC
DAY
TIME
TIME
SYSTEM
TEMPORARY
HEAT SET PT COOL
FAN
AUTO
M6221
CHECK
SET
CLOCK
HEAT/COOL
SETPOINTS
SELECT
PERIOD
CANCEL
HOLD
HUMIDITY
VENTILATE
RUN
SYSTEM
HEAT OFF COOL
FAN
AUTO ON CIRC
DAY
TIME
TIME
SYSTEM
FAN
AUTO ON CIRC
AUTO
FAN
M6224
CHECK
SET
CLOCK
HEAT/COOL
SETPOINTS
SELECT
PERIOD
CANCEL
HOLD
HUMIDITY
VENTILATE
VENTILATE
RUN
SYSTEM
HEAT OFF COOL
FAN
AUTO ON CIRC
DAY
TIME
TIME
SYSTEM
HEAT SET PT COOL
AUTO
FAN
TEMPORARY VENT
