RE252_Honeywell-Compat_PIN-Pad.doc
Page 3 of 4
28-Sep-12
www.ResolutionProducts.com
Pictures
Battery Replacement
CR2032 Battery
+ Terminal up
Insert
Screwdriver here
to open
Stay + Away
Sends Panic
Loop 1
Entering
Code
Sends Disarm
Loop 2
Away
Loop 3
Stay
Loop 4
TO CHANGE PIN CODE:
Current 4-digit access code, and then…
1 + 3 Red LED,and then…
Enter New Code
Red/Green
Status LED
Shows command sent
RE252_Honeywell-Compat_PIN-Pad.doc
Page 4 of 4
28-Sep-12
www.ResolutionProducts.com
Specifications
Not supervised.
Replacement Battery:
CR2032 Lithium / Manganese Dioxide
Temperature Range:
0F to 120F
Housing dimensions:
2x2.25x0.33 inches
1-way RF:
Does not receive panel status
Specifications subject to change without notice.
Notices
“GE”, “Honeywell”, “DSC”, “2GIG” and “Napco” are trademarks owned by General Electric
Company, Honeywell International Inc., Tyco Safety Products Canada LTD, 2GIG Technologies
Inc., and NAPCO Security Systems, Inc., respectively.
Resolution Products, Inc. products will function with one of either GE, Honeywell, DSC or
Napco systems. However, no Resolution product is produced by, endorsed by, nor is officially
associated with GE, Honeywell, DSC or Napco. Resolution recommends verifying proper
enrollment and operation, per control panel installation instructions, at installation.
Warranty
Resolution Products, Inc. will replace products that are defective in their first year.
FCC Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
This device may not cause harmful interference.
This device must accept any interference that may be received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the Resolution Products, Inc. could
void the user's authority to operate this equipment.
FCC ID: U5X-RE252
IC Notice
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
Cet appareil est conforme avec d’Industrie Canada RSS standard exempts de licence.
Son fonctionnement est soumis aux deux conditions suivantes:
1. Ce dispositif ne peut causer des interférences, et
2. Ce dispositif doit accepter toute interférence, y compris les interférences
qui peuvent causer un mauvais fonctionnement du dispositif.
IC: 8310A-RE252
