POL-200-TS User Manual
2
Safety Information
Severe damage
Please, before connecting any external cable, make sure the loop cable has
been disconnected from the panel loop terminals and the tool is completely powered down.
Check for the right terminal connections and make sure there is no external voltage between the
cables to be connected.
The battery life lasts maximum 3 years, so please check the year of manufacture!
Operating at extreme temperatures will significantly affect the battery cycle life.
Danger of explosion in case of inappropriate battery replacement! Batteries must be disposed
of according to the laws in force.
Caution
In case of damage the warranty is limited if the operating and installation instructions
are not followed. The company is not liable for any subsequent or accidental damages. These
installation instructions must be read thoroughly before starting using the tool.
Symbols
The following information is given to ensure personal safety and to prevent damage to the
product described in this manual and to the equipment connected to it.
The safety information and warnings for the prevention of risks that can endanger the life and
health of the users and the maintenance personnel and damage the equipment itself are marked
by the following pictograms. In this manual, these pictograms have the following meanings:
Disposal
In accordance with Directive 2002/96/EG (WEEE), the electrical and electronic equipment,
after being dismantled, must be returned to the manufacturer for proper disposal.
Warning -
Indicates risks for operators and/or machines. Any non-compliance will create
risks for operators and/or machines.
Note -
Important information on a topic or a procedure.