background image

R7195A,B MOTOR POSITIONER

63-2582

2

ORDERING INFORMATION

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the 

TRADELINE® Catalog or price sheets for complete ordering number.

If you have additional questions, need further information, or would like to comment on our products or services, please write or 

phone:

1.

Your local Home and Building Control Sales Office (check white pages of your phone directory).

2.

Home and Building Control Customer Relations

Honeywell, 1885 Douglas Drive North

Minneapolis, Minnesota 55422-4386

In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.

International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France, 

Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.

SPECIFICATIONS

Models:

See Table 1.

Table 1. R7195A,B Models.

Operating Temperature Range:

-30°F to +150°F (-35°C to +66°C).

Slidewire Resistance:

135 ohms or 1000 ohms.

Input Range—R7195A (4-20 mA):

Adjustments: 

Zero: 0.8 to 16.8 mA.

Span: 2.0 to 20.0 mA.

Deadband: 1% to 5%.

Factory Settings:

Zero: 4.0 mA input = 0% to 5% feedback potentiometer 

position.

Full Scale: 20 mA = 95% to 100% feedback potentiometer 

position.

Input Range—R7195B (135-ohm retransmitting slidewire 

input):

Adjustments:

Zero: 0% to 80% of slidewire input.

Span: 12.5% to 125% of slidewire input.

Deadband: 1% to 5% of slidewire input.

Factory Settings:

Zero: 0% to 2% input potentiometer = 0% to 10% feedback 

potentiometer position.

Full Scale: 98% input potentiometer = 90% to 100% 

feedback potentiometer position.

Repositions:

1% Deadband Setting = 100 repositions.

5% Deadband Setting =   20 repositions.

Input Impedance:

R7195A: 75 ohms.

R7195B: 1 Megohm.

Dimensions:

See Fig. 1.

Weight:

R7195A: 2.7 lbs (1.2 kg).

R7195B: 3 lbs (1.4 kg).

Approvals:

Underwriters Laboratories, Inc. Listed: Type 4 Enclosure, File 

Number 84572.

CSA Certified: Enclosure 4, File Number LR47125.

Model Number Operating Voltage

Controller Input

R7195A1031

120 Vac, 60 Hz

4-20 mA

R7195A1056

120 Vac, 60 Hz

4-20 mA (equipped for 

1000-ohm feedback 

slidewire)

R7195A1064

220 Vac, 60 Hz

4-20 mA

R7195B1021

120 Vac, 60 Hz

135-ohm input

Summary of Contents for R7195A













Reviews: