background image

4

RT10A Rugged Tablet

About the Battery

The tablet uses a rechargeable Li-polymer battery as its main power source. 
Several factors determine the life of your battery, such as display brightness, 
display timeout, input device, extreme temperature, and usage. Honeywell 
recommends that you keep the battery charged at all times to prevent data loss. 

RT10 tablets are designed for use with standard battery model RT10-BAT-STD1 
and extended capacity battery model RT10-BAT-EXT1 manufactured for 
Honeywell International Inc.

Note:

To view specifications specific to your battery model, see the battery insert supplied 
with the battery. 

For a list of compatible charging accessories for the RT10 tablet and their part 
numbers, see the RT10 Rugged Tablet

 Accessories Guide,

 available for download 

from 

www.honeywellaidc.com

. Contact your local sales representative for 

replacement battery ordering information.

Charge the Battery

RT10A tablets ship with the battery significantly discharged of power. Fully charge 
the battery before using your tablet for the first time. A fully discharged battery 
charges in approximately 6 hours.

Note:

Using the tablet while charging the battery increases the time required to reach a full 
charge.

Charge Before Use

Make sure you fully charge the battery before you use your tablet. You can charge 
the battery before or after you install it in the tablet. It takes about 6 hours for the 
battery to fully charge.

We recommend using AC power when you start the tablet for the first time. 

Caution:  Read 

Battery Recommendations and Safety Precautions

 on page 8 

and all cautionary markings on the battery, charging peripheral, and 
device using the battery before attempting to install, use, or charge 
the battery. 

Caution: We recommend use of Honeywell Li-poly or Li-ion battery packs. 

Use of any non-Honeywell battery may result in damage not 
covered by the warranty.

Caution: Ensure all components are dry prior to placing the battery in the 

tablet. Mating wet components may cause damage not covered 
by the warranty.

Summary of Contents for RT10A































































































Reviews: