background image

24

RT10A Rugged Tablet

About Honeywell Applications

Honeywell applications help you troubleshoot and connect your computer to other 
devices and networks. Some of the applications in this table are located in the 
Power Tools app. To learn more about Honeywell Power Tools, go to 

www.honeywellaidc.com

 to download the 

Power Tools User Guide

.

Honeywell Applications Available on the Computer

Icon

Application

Description

AutoInstall Settings

Enable the AutoInstall feature, to automatically install 
*.zip or *.apk files containing applications saved in the 
Internal shared storage\honeywell\autoinstall folder and
IPSM card\honeywell\autotinstall folder on the computer 
during the power-up boot or reboot process.

Demos

Honeywell Demo apps demonstrate the basic capabilities of 
the computer and are not intended as functional business 
solutions. The demos included, demonstrate scanning, 
signature capture, NFC functionality, and printing via 
Bluetooth technology.
Information on how to create custom applications for your 
Honeywell mobile computer can be found in the Honeywell 
Software Development Kit (SDK) for Android, available from 
th

Technical Support Downloads Portal.

HUpgrader

Use the HUpgrader app to view the current OTA version on 
the computer, check for updates, or initiate an OTA upgrade 
from storage.

Scanner Edge

Use the Scanner Edge app to connect or disconnect a 
Bluetooth scanner.

View connected devices.

Pair with a Bluetooth Scanner.

Disconnect a Bluetooth Scanner.

Power Tools

BattMon

BattMon provides information on the charge status and 
health of the battery, and provides access to activate battery 
status notifications and battery charging history logs.

ConfigApps

ConfigApps enables or disables applications and application 
updates.

Configure Autorun

Configure Autorun provides the ability to set applications to 
automatically run after a reboot.

Diagnostic Information

Diagnostic Information provides access to system statistics, 
notifications and version information about the computer.

Summary of Contents for RT10A































































































Reviews: