background image

RT10W Rugged Tablet

23

If Launcher is not included on your computer model, you can download a trial 
version of the software for evaluation. After the evaluation period expires, you need 
to purchase a license. For more information about Launcher, visit 

www.honeywellaidc.com

.

EZConfig for Scanning

EZConfig for Scanning supports advanced customization and configuration of the 
tablet. EZConfig includes a standard XML editor and a configuration barcode 
scanner feature. You can use EZConfig for Scanning to configure the image engine 
of the RT10W. (See 

Change the Scanner Settings

 on page 25.)

For more information about EZConfig for Scanning, visit 

www.honeywellaidc.com

.

Applications You Can Download to the Tablet

You can download Honeywell applications to extend the capabilities of the tablet. 
You may need to purchase a license to run some applications. To learn more about 
Honeywell software solutions, go to 

www.honeywellaidc.com

 

> Products > 

Software

.

CloneNGo

CloneNGo is a peer-to-peer device cloning application that easily transfers the 
configuration of a master computer to one or more clone (client) computers. 
CloneNGo is available for download from the Technical Support Downloads Portal 
(see 

Update Drivers and Software

 on page 53).

For more information about using CloneNGo on the RT10W, refer to the CloneNGo 
User Guide available at 

www.honeywellaidc.com

.

Summary of Contents for RT10W











































































Reviews: