RT10W Rugged Tablet
37
Manual
1. Select
Bluetooth Scanning
from the Control Panel (either large or small icon
view option must be selected).
2. Tap
Add Device
.
3. Select
Manual
.
4. Tap
Next
.
5. Enter the MAC address of the Bluetooth scanner.
6. Tap
Next
.
Troubleshooting
•
The Honeywell Xenon 1902 Bluetooth scanner does not work with Quick
Connect. It must be connected using the Search or Manual options.
•
Make sure the scanner is in the correct mode. Barcodes to set the mode can be
found in the manual provided with the Bluetooth scanner.
•
The scanner must be a master device to use the Quick Connect option.
•
The scanner must be a slave device to use the Search or Manual option.
•
The Motorola/Symbol LS3578 family of scanners may not support the Quick
Connect feature (depending on firmware installed). If Quick Connect does not
work, use the other options to connect these scanners.
•
If the Honeywell Granit 1911i and Granit 1981i scanners cannot be found with
the Search option, scan the PDAs/Mobility Systems Devices barcode from the
scanner manual and search again.
•
If the Honeywell Granit 1911i and Granit 1981i scanners cannot connect using
the manual option, scan the PDAs/Mobility Systems Devices barcode from the
scanner manual then repeat the manual add process again.
•
If the Honeywell Granit 1911i and Granit 1981i scanners are not removed after
using the Remove option, the auto-reconnect option is enabled on the Granit
scanner (this is the default option). To remove the scanner:
•
Scan the disable auto-reconnect barcode from the Granit scanner manual
then tap Remove, or
•
Scan BT_RMV to unlink and disconnect the scanner the tap Remove.
•
If a Honeywell/LXE ring scanner is not connecting, scan the
Restore Factory
Defaults
barcode in the scanner manual and try connecting again.
Adding Other Scanners
Some scanners may not be supported/discoverable by Bluetooth Scanning. In this
case, use the Microsoft Bluetooth panels to add the scanner.
Note:
The Microsoft Bluetooth panels should only be used when the scanner cannot be
connected with one of the methods listed above.
Summary of Contents for RT10W
