background image

 

MAN-0077 

                              Honeywell Global Tracking Ltd 

 

 

29 

 

Appendix B – Warranty 

Honeywell International Inc. ("HII") warrants its products to be free from defects in materials and workmanship 
and to conform to HII’s published specifications applicable to the products purchased at the time of shipment.  
This warranty does not cover any HII product which is (i) improperly installed or used; (ii) damaged by accident 
or negligence, including failure to follow the proper maintenance, service, and cleaning schedule; or (iii) 
damaged as a result of (A) modification or alteration by the purchaser or other party, (B) excessive voltage or 
current supplied to or drawn from the interface connections, (C) static electricity or electro-static discharge, (D) 
operation under conditions beyond the specified operating parameters, or (E) repair or service of the product 
by anyone other than HII or its authorized representatives. 

This warranty shall extend from the time of shipment for the duration published by HII for the product at the 
time of purchase ("Warranty Period").  Any defective product must be returned (at purchaser’s expense) during 
the Warranty Period to HII factory or authorized service center for inspection.  No product will be accepted by 
HII without a Return Materials Authorization, which may be obtained by contacting HII.  In the event that the 
product is returned to HII or its authorized service center within the Warranty Period and HII determines to its 
satisfaction that the product is defective due to defects in materials or workmanship, HII, at its sole option, will 
either repair or replace the product without charge, except for return shipping to HII. 

EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE LAW, THE FOREGOING WARRANTY IS 
IN LIEU OF ALL OTHER COVENANTS OR WARRANTIES, EITHER EXPRESSED OR IMPLIED, ORAL OR 
WRITTEN, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. 

HII’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY IS LIMITED 
TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW OR REFURBISHED 
PARTS.  IN NO EVENT SHALL HII BE LIABLE FOR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL 
DAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITY OF HII ARISING IN CONNECTION WITH ANY 
PRODUCT SOLD HEREUNDER (WHETHER SUCH LIABILITY ARISES FROM A CLAIM BASED ON 
CONTRACT, WARRANTY, TORT, OR OTHERWISE) EXCEED THE ACTUAL AMOUNT PAID TO HII FOR 
THE PRODUCT.  THESE LIMITATIONS ON LIABILITY SHALL REMAIN IN FULL FORCE AND EFFECT 
EVEN WHEN HII MAY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH INJURIES, LOSSES, OR 
DAMAGES.  SOME STATES, PROVINCES, OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR 
LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR 
EXCLUSION MAY NOT APPLY TO YOU. 

All provisions of this Limited Warranty are separate and severable, which means that if any provision is held 
invalid and unenforceable, such determination shall not affect the validity of enforceability of the other 
provisions hereof.  Use of any peripherals not provided by the manufacturer may result in damage not covered 
by this warranty. This includes but is not limited to: cables, power supplies, cradles, and docking stations. HII 
extends these warranties only to the first end-users of the products.  These warranties are non-transferable. 

The duration of the limited warranty for the SAT-IDP is one year. 

Summary of Contents for SAT-IDP




































Reviews: