20
ALARM MENU
Alarm Beep : ON /
OFF
Alarm Dwell : OFF
/ 1sec~200sec
Alarm Action
Alarm History
Save and Exit
ALARM SCHEDULE page : 001
DOME Alarm OUT Alias
0001 1 2 3 - - 6 7 8 001 999
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
ON : ins OFF : del ENTR : save ESC :cancel
ALARM HISTORY page : 0001
CAM Alarm Date Time
- - - - --------- -------- --------
- - - - --------- -------- --------
- - - - --------- -------- --------
- - - - --------- -------- --------
- - - - --------- -------- --------
OFF : clear history ESC: exit
Alarm Menu
(
Shft + Menu
è
Alarm
)
Alarm Beep -- Enable or disable the beep sound when there is alarm activated.
Alarm Dwell
–
Instant alarm will be extended until programmed time.
Alarm Schedule
(
Shft + Menu
è
Alarm
è
Alarm Action
)
DOME : ID of the dome to be programmed.
Ex) 0001
Alarm : 8 Alarm inputs of dome.
Alarm 4, 5 is not used for
OUT : 999 external dry contact outputs.
Alias : 999 alias presets. See Alias Preset menu.
:
If there is an alarm from the programmed dome, signal can be sent out to one of 999 external dry contact
outputs.
Also, in conjuction with the alarm, multiple dome presets will be called if programmed.
500 alarm schedule can be stored in this joystick controller.
Push Up/ Down the joystick will scroll previous/ next page on the first/ last row.
Twisting the zoom handle on the camera ID field to enter program mode and select ID. Rotating the handle,
the programmed IDs (programmed in camera setup menu) will be scrolled.
Push the joystick to the right to setup alarm field. Activate or deactivate specific alarm inputs by rotating the
zoom handle. And then program the rest of the part ( Alarm input and OUTput and Alias)
Alarm History
(
Shft + Menu
è
Alarm
è
Alarm History
)
This screen shows up to 5000 of the most recent alarms activations.
