43
MAN0530 Issue 10 - 11/09
Searchline Excel
2104M0506
This section is only relevant to handheld software versions 4VO and greater.
This switches on the unit.
Note:
Full details of the SHC1 Handheld Interrogator can be
found in Appendix A.
The Interrogator displays the following start-up message for approximately three seconds:
Z - SHC1 EXCEL
Interrogator
(3)
Quickly check the type of connected detector shown on the top line of the message.
The display shows
excel or or optima.
(4)
If the unit displays
or
Optima
immediately press the
ESC
key on the
keypad.
The esC
key must be pressed within 3 seconds to have any effect. Also see
Appendix A
,
section 5.6.
This toggles the Interrogator mode between
excel
,
optima Plus and optima.
The start-up message is updated and displayed again for 3 seconds then the unit
displays the
Main
menu, which is
the top level of its Interrogator's menu style interface,
as follows:
Main
Display
The first line of the display shows the current level in the menu tree and the second line
displays a sub-menu title, action or data.
setting the real-time Clock
The gas detector clock needs to be initially set so that faults, events, etc., can be accurately
recorded and tracked for diagnostic purposes.
(1)
Select
Calibrate
from the
Main
menu by pressing the (
up
) and (
down
) keys on the
keypad to navigate through the menu options.
(2)
Press
(
Enter
) on the Interrogator keypad to display the
Calibrate
menu.
(3)
Select
Set Time/Date
from the
Calibrate
menu.
3. INSTALLATION AND OPERATION
>
>
ESC
Z - SHC1 EXCEL
Interrogator 4V0
Calibrator
Type SHC1
