Chapter
5
Mobile App
Use the Sensepoint app to allow your smart device to connect to
Sensepoint XCL. This mobile app makes it much easier to configure and
maintain Sensepoint XCL detectors. The general procedure of using the
mobile app is as follows:
1. Download
Sensepoint App
from Google Play Store. Install and
launch the app.
2. Create and register a user account, and log on with the created
account information.
3. To associate with one or more gas detectors, scan the QR code on
the sheet included in the box or enter its Activation Key and Device
Serial Number.
4. Complete the installation of the detectors.
5. On the app’s home screen, tap
DETECTORS
to scan for available
detectors.
6. Select a detector from the detector list to pair with.
7. Look for the detector whose Status Indicator is flashing blue.
8. Tap
Confirm Detector
to pair with that detector. Otherwise, tap
Return to list
to select one of the others.
9. To connect to detectors that are not added to your user account, you
will need registration sheet containing the device QR code. This can
also be found on a label on the rear of the electronics module.
When a Bluetooth connection is established, the detector’s reading is
displayed on the app interface with the gas type.
For details how to use the mobile app, refer to the Sensepoint app
manual.
39