28 Control Panel
Honeywell
7
Figure 7.1: SmartDrive Compact Control panel
7.3 KEYPAD
The keypad section of the control panel consists of a navigation wheel and START
and STOP buttons (see Figure 7.1). The navigation wheel is used for navigating on
the panel display, but it also works as a reference potentiometer when KEYPAD has
been selected as the control place of the drive. The wheel has two separate func-
tions;
- Rotating the wheel e.g. for changing parameter value (12 steps / round)
- Pressing the wheel e.g. for accepting the new value.
The drive stops always, regardless of the selected control place, by pressing the key-
pad STOP button. The drive starts by pressing the keypad START button, but only if
the selected control place is KEYPAD.