2 - 5
Dolphin 75e / Dolphin CT50 powered by Android 6.0 Marshmallow
1.
Make sure the SRX-SL headset is on and is in pairing mode (the LED is solid green).
2.
Touch
All Apps
>
Settings
>
Bluetooth.
3.
Verify the
Bluetooth
radio is turned On
.
4.
Return to the home screen.
5.
Touch
All Apps
> Settings
.
6.
Touch
More
.
7.
Touch the switch button next to
NFC
to turn On
short-range wireless data exchange.
8.
Verify
eSE2
is selected as the default
ISO-DEP route
.
9.
The location of the NFC tag in the headset eModule is under the Power button.
10. Hold the NFC tag on the eModule close to the back of the hand-held device. It may be necessary to move the eModule
up and down the back of the device to get the NFC tag close to the NFC radio in the hand-held device.
11. When prompted, select
Yes
to pair the devices. This prompt is only displayed the first time the devices pair.
12. When the tag is recognized, the hand-held device emits a sound and the tag data is displayed on screen. If the sound
is muted, the hand-held device vibrates when the NFC tag is detected
Care and Use of the SRX-SL Headset
Proper care and use of these products will ensure that they work well for a long time.
I
mportant:
For maximum hygiene, Honeywell discourages sharing headbands among operators.
The design of the SRX-SL Wireless Headset features an electronics module that can be removed from the headband The elec-
tronics module can be shared among operators over multiple shifts, providing some level of hygiene while potentially reducing
costs.
Put On the Headset
Always use headband ear pads with Honeywell headsets to protect the equipment and ensure optimum speech recognition
performance.
1.
Put the headset on and adjust the ear pad to fit snugly over your ear.
2.
Rotate the microphone into position with the rotating lever at the ear piece.
