Revision 3
STT850
Temperature Transmitter User’s Manual
Page 19
3.1.16 Constant Current Source Mode Procedure
Figure 13
– Current Loop Test Connections
1.
Refer to
Figure
13
for test connections. Verify the integrity of electrical components in the output
current loop.
2.
Establish communication with the Transmitter. For these procedures, the values of components in
the current loop are not critical if they support reliable communication between the Transmitter
and the Toolkit.
3.
On the Toolkit, display the
Output Calibration
box.
4.
In the Output Calibration box, select the
Loop Test
button; the
LOOP TEST
box will be
displayed.
5.
Select the desired constant-level Output: 0 %, 100 %, or Other (any between 0 % - 100 %).
Summary of Contents for STT850 SMARTLINE
