background image

15 

15

intervals 

 

Press 

UP

 button selecting a desired time interval and press 

SET

 

confirming the setting 

 

HIGH RAIN ALARM 

The high rain alarm for the past 24 hours can be set and displayed at any 
time by pressing 

ALARM

 button on the front panel. 

To set the high rain alarm,   

 

Press the 

ALARM

 button on the front panel until the “

ALARM HI

” 

will appear on the upper right corner of the rainfall information 
line. 

 

Press and hold the 

ALARM

 button for 2 seconds or until the 

rainfall data digits will flash. 

 

Enter the rainfall amount you want to set the rain alarm for using 
the buttons 

S

 or

 

T

 

 

Press the 

ALARM 

button again to confirm and the high rain 

alarm will be set 

 

PRECAUTIONS 

This product is engineered to give you years of satisfactory service if 
handled carefully. Here are a few precautions: 

 

Do not immerse the units in water. 

 

Do not clean the units with abrasive or corrosive materials. They 
may scratch the plastic parts and corrode the electronic circuits. 

 

Do not subject the product to excessive force, shock, dust, 
temperature, or humidity, which may result in malfunctions, 
shorter lifespan, damaged batteries, and damaged parts. 

 

Do not tamper with the units internal components. Doing so will 
invalidate the warranty and may cause damage. These units 

16 

contain no user-serviceable parts. 

 

Use only fresh batteries. Do not mix new and old batteries. 

 

Read the user's manual thoroughly before operating the units. 

Summary of Contents for TC152 - Wireless Range Gauge











Reviews: