background image

18

17

20

19

BACKLIGHT

The backlight feature is enabled only after the time is set.

To activate the backlight press the 

SNOOZE/LIGHT

 button 

once, and both – clock and weather station displays - will 

light up for five seconds.

PRECAUTIONS

• This product is engineered to give you years of satisfactory 

service if handled carefully. Here are a few precautions:

• Do not immerse the units in water.

• Do not clean the units with abrasive or corrosive 

materials. They may scratch the plastic parts and corrode 

the electronic circuits.

• Do not subject the product to excessive force, shock, dust, 

temperature, or humidity, which may result in malfunctions, 

shorter lifespan, damaged batteries, and damaged parts.

• Do not tamper with the units internal components. Doing 

so will invalidate the warranty and may cause damage. 

These units contain no user-serviceable parts.

• Use only fresh batteries. Do not mix new and old 

batteries.

• Read the user's manual thoroughly before operating the 

units.

TROUBLESHOOTING

Check here before contacting customer service.

SPECIFICATIONS

Main Unit

Indoor Temperature

Proposed operating range

: -5.0

°

C to +50.0

°

C/

  23.0

°

F to 122.0

°

F

Temperature resolution

: 0.1

°

C/0.2

°

F

Indoor Humidity

Proposed operating range

: 25%RH to 90%RH

Humidity resolution

: 1%

Comfort level indicators – 

COMFORT, WET

 and 

DRY

User-selectable (

°

F or 

°

C) temperature display

Weather Forecast in five large 

graphic icons

: Sunny, Partly Cloudy, 

  Cloudy, Rainy and Snowy

Remote channels auto-scan feature 

Maximum number of remote sensors : 3 (one included)

Readings update interval

: every 45 seconds

EL

 backlight for the weather station ; 

Bulb

 backlight for 

analog clock

Low battery indicators – for each remote channel and main unit

Clock

Precise Quartz Time 

Crescendo 2 minutes alarm with 4 minutes snooze

Remote Sensor

Remote Temperature

Proposed operating range 

with alkaline batteries

:  -20.0

°

C to + 70.0

°

C/

   -4.0

°

F to + 158

°

F

Proposed operating range 

with lithium batteries

:  -38.8

°

C to + 70.0

°

C/

   -38.0

°

F to +158

°

F

Temperature resolution

:  0.1

°

C/0.2

°

F

RF Transmission Frequency

:  433 MHz

RF range: Maximum 200 feet (60 meters) 

Temperature & humidity transmission cycle: approximately 

  45 seconds 

Low battery indicator

Wall-mount of Table stand

Power

Main unit

: 2 AA size (UM-3) 1.5V 

  batteries (not included)

Remote Sensor

: 2 AA size (UM-3) 1.5V 

  batteries (not included)

Dimensions

Main unit

: 3.32(L) x 6.97(H) x 

  1.49(D) inches

Remote sensor

: 2.37(L) x 4(H) x 

  1(D) inch

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, and 

(2) This device must accept any interference received, 

including interference that may cause undesired operation.

Warning: Changes or modification to this unit not expressly 

approved by the party responsible for compliance could 

void the user’s authority to operate the equipment.

NOTE: This equipment had been tested and found to comply 

with the limits for a Class B Digital device, pursuant to Part 

15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a 

residential installation. This equipment, installed and used 

in accordance with the instructions, may cause harmful 

interference to radio communications.

There is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is 

encouraged to improve or correct turning the interference by 

one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different 

from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician 

for help.

DECLARATION OF CONFORMITY

We

Manufacturer: Hideki Electronics Ltd.

Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk Road, 

Kwai Chung, New Territories, Hong Kong

declare that the product

Product No.: TC682EL

Product Name: Honeywell Wireless Digital Weather Station 

with Analog Clock is in conformity with Part 15 of the FCC 

Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including 

interference that may cause undesired operation.

The information above is not to be used as a contact for 

support or sales.

Issue

Symptom

Solution

Temperature or

Humidity

Remote sensor

Displays "

LL

" or

"

HH

"

Cannot locate remote 

sensor

Cannot change the 

channel

Cannot change the ºC 

to ºF and back

Data does not match

data on the main unit

Temperature or

humidity out of range

Check batteries

Check location

Press "

RESET

" after

setting the channel

Press "

RESET

" after

setting ºC/ºF

Initiate manual sensor

search

Summary of Contents for TC682EL







Reviews: