31
12
Use the 2x Torx screws to lock the reader onto the support (see
Figure 19
).
When the cables come from the external pipe (this installation may not be IP65)
There are three conduits on the swivel, each with a diameter of 20mm.
Choose the best one and remove the rubber cap.
1
Determine an appropriate mounting position for the reader on the wall.
2
Make sure that the space is large enough to mount the reader on the
support and attach it with the Torx screws. See dimensions in
Figure 11
.
3
Using the template as a guide, drill three holes (the size of the holes is
indicated on the mounting template) when the installation is on the
wall.
4
Remove the waterproof plug on the swivel base using a pair of pliers.
5
Insert the tamper (if used).
6
Attach the base to the swivel body using two screws inserted from the
back (see
Figure 15
). Check to make sure the tamper is working
properly.
Figure 19
Locking the reader onto the swivel support
