THERAPRO HR90
33-00084EFS—02
6
Operating hints
Operating the radiator controller
comfortably
The radiator controller can be removed from the radiator
to facilitate programming.
1.
Unlock the radiator controller. To do so, push the
slide at the radiator controller towards unlocked.
2.
Pull the radiator controller off the valve baseplate.
8. Programming – Time program
Planning the time program
You can specify up to 6 setpoints per day.
The following has to be assigned to each setpoint:
• One of the three preset temperatures (Comfort
temperature 1, 2 and Setback temperature).
• Beginning of the Heating/Setback period
• End of the Heating/Setback period
Example
The example shows the following time program:
NOTE: An overview of the program structure is
shown on the last page of these instructions.
Week program
You can adjust the time program to your personal weekly
routine. You have the following options to this purpose:
• Separate time programs for weekdays Mo – Fr (1 – 5)
and weekend Sa – Su (6 – 7)
• One time program for the days of the week Mo – Su (1
– 7)
• A different time program for each day of the week Mo,
Tu, We, Th, Fr, Sa, Su (1, 2, 3, 4, 5, 6, 7)
NOTE: We recommend that you write down your
time program before beginning program-
ming.
Lost your way in the program?
Press the button
AUTO/ECO/MANU
Automatic is displayed. The last entry is rejected.
Setting the time program
Selecting weekdays
1.
Press the
PROG
button.
COMFORT 1
is displayed.
2.
Turn the adjustment dial clockwise until program is
displayed.
3.
Press the
OK
button and use the adjustment dial to
select the desired weekdays for your time program:
MO - FR, SA - SU, MO - SU, MO, TU, ..., SU or day
off
4.
Confirm the selected weekdays with the OK button.
The temperature as well as the beginning and end
of the first setpoint, e.g.:
• The end of a setpoint is also the beginning of the next
setpoint.
• You can use the adjustment dial to change from one
setpoint to another and thus view the setting of all the
programmed setpoints.
• Only the programmed setpoints are displayed.
Editing setpoints
1.
In order to edit the displayed setpoint press the
OK
button.
The temperature display flashes.
2.
Use the adjustment dial to select the desired tem-
perature (Comfort temperature 1, 2 or Setback tem-
perature) for the selected setpoint and confirm with
OK.
The beginning of the selected setpoint flashes.
NOTE: The time scale for programming of the set-
points begins at 3:00 in the morning and
ends at 2:50 on the following day.
3.
Use the adjustment dial to set the desired beginning
for the selected setpoint and confirm with
OK
.
The end of the selected setpoint flashes.
4.
Use the adjustment dial to set the desired end of
the selected setpoint and confirm with
OK
.
Saved is displayed briefly. Subsequently the tem-
perature as well as the beginning and end of the
setpoint are displayed.
5.
For the further setpoints also select the temperature
as well as the beginning and end of the setpoint as
described in Steps 1 to 5.
Set-
point
Time
Temperature
1
6:00 am – 9:00 am
68 °F
(Comfort temperature 1)
2
9:00 am – 12:00 pm
61 °F
(Setback temperature)
3
12:00 pm – 2:00 pm
68 °F
(Comfort temperature 1)
4
2:00 pm – 5:00 pm
61 °F
(Setback temperature)
5
5:00 pm – 10:00 pm
71.5 °F
(Comfort temperature 2)
6
10:00 pm – 6:00 am
61 °F
(Setback temperature)
2
1
M35642
2
3
4
5
1 6
COMFORT1
SAVING
COMFORT2
LOWERING/
SAVING
HEATING
HEATING
HEATING
SETPOINTS
12am
6am
12pm
6pm
12am
M35643
°
M35644
