308
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
It is important the Radio Mode parameter correspond to the AP to which the device is to
connect. For example, if this parameter is set to G rates only, the Thor VM2 may only
connect to APs set for G rates and not those set for B and G rates.
Using CKIP
Contact
if an update to the SCU is needed to support CKIP.
To use CKIP on the Thor VM2:
1. Select
WEP
from the encryption list and None from the
EAP type
list. CKIP LEAP
is
not
supported.
2. The Thor VM2 can connect to any AP that is configured for manual WEP or manual
CKIP. The Thor VM2 automatically detects whether WEP or CKIP is configured on the
AP and connects accordingly.
3. All APs must be configured the same. If some APs are configured with different
security types enabled, the Thor VM2 may experience disconnects or delays when
roaming.
Status
Start > Programs > Summit > Status tab
This screen provides information on the radio:
•
The profile being used.
Radio Mode
BGA Rates
Full
Specify 802.11a, 802.11b and/or 802.11g rates when communicating
with the AP. The options displayed for this parameter depend on the type
of radio installed in the mobile device.
Options:
B rates only (1, 2, 5.5 and 11 Mbps)
BG Rates Full (All B and G rates)
G rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps)
BG optimized or BG subset (1, 2, 5.5, 6, 11, 24, 36 and 54 Mbps)
A rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps)
ABG Rates Full (All A rates and all B and G rates with A rates preferred)
BGA Rates Full (All B and G rates and all A rates with B and G rates
preferred)
Ad Hoc (when connecting to another client device instead of an AP)
Default:
BGA Rates Full
Parameter
Default
Explanation
Summary of Contents for Thor VM2
