Honeywell Thor VM2 User Manual Download

Page: 356 / 398

344

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide

External 60-Key Keyboard

The key map table that follows lists the commands used when using the Thor VM2 with
the

60-key PS/2 Keyboard

The 60-key keyboard does not have a NumLock indicator or key. NumLock can be tog-
gled On or Off using the

2nd SHIFT F10

keypress sequence. The default for NumLock is

On. Changes made to the NumLock status persist across a Windows restart.

When running RFTerm, please refer to the RFTerm Reference Guide for equivalent keys
and keypress sequences.

60 Key KeyMap 101-Key Equivalencies

•

The following keymap is used on a Thor VM2 that is NOT running RFTerm.

•

When using a sequence of keys that includes the 2nd key, press the 2nd key first then
the rest of the key sequence.

•

When the Thor VM2 boots, the default condition of Caps (or CapsLock) is Off. The
Caps (or CapsLock) condition can be toggled with a

2nd + F1

key sequence. The

CAPS LED is illuminated when CapsLock is On. The keymaps below assume Caps is
Off.

•

The Thor VM2 keyboard has several control keys. The following control keys are not
used:

•

The 2nd function of the

key is not used as Windows Power Management

controls all power management modes on the Thor VM2.

•

The 2nd functions of the

and

keys are not used as the display brightness is

adjusted via the buttons on the front of the Thor VM2.

•

The 2nd functions of the

and

keys are not used as the Thor VM2 has TFT

LCD screen with no provision for contrast adjustments.

•

The 2nd functions of the

and

keys are not used as the sound volume on the

Thor VM2 is controlled with a Microsoft Windows Control Panel.

•

The 2nd function of the

F10

key is not used as the display backlight timer also

controls the keyboard backlight.

To get this Key /
Function

Press These Keys in this Order

Power On/Off

Power

2nd

Summary of Contents for Thor VM2















































































































































































































































































































































































































Search results

Summary of Contents for Thor VM2

Reviews:

Related manuals for Thor VM2

Brands by name

Popular brands

Honeywell Thor VM2, User Manual

Search results

Summary of Contents for Thor VM2

Reviews:

Related manuals for Thor VM2

Brands by name

Popular brands