Honeywell Thor VX9 User Manual Download

Page: 108 / 198

5 - 46

Note: Tap the Commit button to save changes. If this panel is closed before tapping the Commit button, changes are

not saved!

RTS Thresh

2347

If the packet size exceeds the specified number of bytes set in the Request
to Send (RTS) threshold, an RTS is sent before sending the packet. A low
RTS threshold setting can be useful in areas where many client devices are
associating with the Access Point.
This parameter cannot be changed.

LED

Off

The LED on the wireless card is not visible to the user when the wireless
card is installed in a sealed mobile device.
Options are: On, Off.

Tray Icon

Determines if the Summit icon is displayed in the System tray.
Options are: On, Off
The tray icon is not displayed when the Thor VX9 is running a Windows Em-
bedded Standard or Windows 7 Professional operating system.

Hide Password

When On, the Summit Config Utility masks passwords (characters on the
screen are displayed as an *) as they are typed and when they are viewed.
When Off, password characters are not masked.
Options are: On, Off.

Admin Password

SUMMIT
(or Blank)

A string of up to 64 alphanumeric characters that must be entered when the
Admin Login button is tapped. If Hide Password is On, the password is
masked when typed in the Admin Password Entry dialog box. The pass-
word is case sensitive. This value is masked when the Admin is logged out.
Options are: none.

Auth Timeout

8 seconds

Specifies the number of seconds the Summit software waits for an EAP au-
thentication request to succeed or fail.
If the authentication credentials are stored in the active profile and the au-
thentication times out, the association fails. No error message or prompting
for corrected credentials is displayed.
If the authentication credentials are not stored in the active profile and the
authentication times out, the user is again prompted to enter the creden-
tials.
Options are: An integer from 3 to 60.

Certs Path

certificates

A valid directory path, of up to 64 characters, where WPA Certificate Au-
thority and User Certificates are stored on the mobile device when not using
the Windows certificates store. Ensure the Windows folder path currently
exists before assigning the path in this parameter. See

Certificates

(page

5-64) for instructions on obtaining CA and User Certificates. This value is
masked when the Admin is logged out.
Options are: none.
The complete path is C:\Program Files\Summit\certs

Ping Payload

32 bytes

Maximum amount of data to be transmitted on a ping.
Options are: 32 bytes, 64, 128, 256, 512, or 1024 bytes.

Ping Timeout ms

5000

The amount of time, in milliseconds, that a device will be continuously
pinged. The Stop Ping button can be tapped to end the ping process ahead
of the ping timeout.
Options are: Any number between 0 and 30000 ms.

Ping Delay ms

1000

The amount of time, in milliseconds, between each ping after a Start Ping
button tap.
Options are: Any number between 0 and 30000 ms.

Logon Options

SCU

Use SCU or Windows login credentials. See

Logon Options

(page 5-47).

Parameter

Default

Function