background image

5 - 54

PEAP/MSCHAP

To use PEAP/MSCHAP, make sure the following profile options are used.

Enter the 

SSID 

of the Access Point assigned to this profile

Set 

EAP Type 

to 

PEAP-MSCHAP

Set 

Encryption 

to 

WPA TKIP

Set 

Auth Type

 to 

Open

To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for encryption and complete other 
entries as detailed in this section.

See 

Sign-On vs. Stored Credentials

 (page 5-48) for information on entering credentials.

Click the 

Credentials 

button.

No entries except the CA Certificate Filename are necessary for Sign-On Credentials as the user will be prompted 
for the User Name and Password when connecting to the network.

For Stored Credentials, User, Password and the CA Certificate Filename must be entered.

Enter these items as directed below.

Enter the Domain\Username (if the Domain is required), otherwise enter the Username.

Enter the password.

Leave the CA Certificate File Name blank for now.

Click 

OK 

then click 

Commit

. Ensure the correct Active profile is selected on the Main Tab.

See 

Windows Certificate Store vs. Certs Path

 (page 5-50) for more information on certificate storage.

Once successfully authenticated, import the CA certificate into the Windows certificate store. Return to the Credentials 
screen and check the 

Validate server

 checkbox. 

Summary of Contents for Thor VX9







































































































































































































Reviews: