5 - 34
WPA PSK
To connect using WPA/PSK, make sure the following profile options are used:
1.
Enter the
SSID
of the Access Point assigned to this profile
2.
Set
Auth Type
to
Open
3.
Set
WPA
as follows:
•
Select
WPA/WPA2
to use either TKIP/AES or AES-CCMP
•
Select
WPA2
to use AEX-CCMP
4.
Set
Encryption
to either
TKIP/AES
or
AES-CCMP
depending on WPA type selected
5.
Set
Authentication
to
PSK
Click the
WEP keys/PSKs
button.
This value can be 64 hex characters or an 8 to 63 byte ASCII value. Enter the key and click
OK
.
Once configured, click the
Commit
button.
Ensure the correct Active Profile is selected on the
Configuration
tab and restart. The
Status
tab shows the device is
connected.
Summary of Contents for Thor VX9
