33
The snooze duration for listed alarms can also be programmed up to 15 minutes.
ACCESSING TIME WINDOW
Press
UP
or
DOWN
until the
TIME
icon will flash.
PROGRAMMING YOUR LOCATION
IMPORTANT
: There are two options available for programming a location – an
auto
and
manual
.
In case of an
auto programming
, select the closest city code from the codes list
programmed in the unit, then all necessary location data (longitude, latitude, time zone
and daylight savings time adjustment) will be set automatically.
In case of the
manual programming
, select the code
USR (user)
from the city codes list,
then you would need to enter all location data (longitude, latitude, time zone and daylight
savings time adjustment) manually.
AUTO-PROGRAMMING
•
In the
Time Window
, press and hold
SET
button until the day of week
language abbreviation
“ENG”
will flash
•
Press the
UP
or
DOWN
selecting the day of the week in English, German,
French, Italian, Spanish or Dutch
•
Press
SET
to confirm selection
•
Select the city code closest to your area by pressing
UP
or
DOWN.
Refer to P.
for a list of available codes
•
Press
SET
to confirm the selection and enter to the year, calendar and
time
setting
mode
•
Press the
UP
or
DOWN
selecting the current year, date, month, time format,
hour and minutes
•
Press
SET
every time to confirm each selection and move to the next
MANUAL PROGRAMMING
•
In the
Time Window
, press and hold
SET
button until the day of week
language abbreviation
“ENG”
will flash
•
Press the
UP
or
DOWN
selecting the day of the week in English, German,
French, Italian, Spanish or Dutch
•
Press
SET
to confirm selection
•
Select the code
USR
by pressing
UP
or
DOWN
•
Press
SET
to confirm selection and enter to the latitude and longitude setting
mode (the degrees of latitude will flash)
•
Press
UP
or
DOWN
to adjust the latitude (degrees, minutes and direction).
34
Press and hold either button for quick digits advance
•
Press
SET
to confirm selection
•
Continue setting the longitude (degrees, minutes and direction) using the same
technique
•
Press
SET
to confirm the selection –
0:00 + tz
will flash prompting to enter the
Time Zone setting mode (the Time Zone data is provided on P.)
•
Set the Time Zone by pressing
UP
or
DOWN
to adjust the time in 30 min
intervals. Press and hold either button for quick digits advance
•
Press
SET
to confirm selection – the
DST no
will flash prompting to set the
Daylight Savings Time option
•
Press
UP
to enable and
DOWN
to disable the DST option
•
Press
SET
to confirm selection and the year digits will flash
•
Continue setting the year, month, day, calendar format (day/month or
month/day), time format (12 or 24 hours), local hour and minutes, using the
same technique
After programming is complete the display will return to the default
Time Window
.
Note
: Press and hold
SET
anytime during the setup to return to the default
Time
Window
and all previous settings will be cancelled
.
DIFFERENT CLOCK AND CALENDAR MODES
In the
Time Window
press
SET
selecting either:
•
Hour and Minutes with the Day of the week
•
Hour and Minutes with the City code
•
Hour and Minutes with the Seconds
•
Month with the day and a year
•
Hour and Minutes for UTC (Coordinated Universal Time)
ACTIVATING OR DEACTIVATING ALARMS
•
Press the
ALARM/CHART
to display the Weekday Alarm (
W
), Single Alarm (
S
)
or Ice Warning Alarm (
Pre-Al
) time. If these alarms are not set, the
abbreviation
OFF
will be displayed
•
To enable or disable any of these alarms, press
UP
or
DOWN
Note: Press
SET
anytime during alarm selection mode to return to the default clock
display.
PROGRAMMING ALARMS
•
In the
Time Window
, press the
ALARM/CHART
selecting the desired alarm-
W
,
S
or
PRE-AL
•
Press and hold
ALARM/CHART
button until the hour digit will flash
