background image

19 

19 

STANDARD WARRANTY INFORMATION 

This product is warranted from manufacturing defects for 

one year

 from date of 

retail purchase. It does not cover damages or wear resulting from accident, 
misuse, abuse, commercial use, or unauthorized adjustment and repair. 
Note that online product registration is required to ensure valid warranty 
protection. 
To register your product, go to our Company website at: 

www.honeywellweatherstations.com

. Click Online Product Registration under 

the Customer Service menu. 
Should you require assistance with this product and its operation, please 
contact our

 Customer Service at 1(866) 443 3543

Please direct all returns to the place of the original purchase. Should this not be 
possible, contact Hideki Customer Service for assistance and to obtain a 
Return Merchandise Authorization (RMA). 
Returns without a return authorization will be refused. Please retain your 
original receipt as you may be asked to provide a copy for proof of purchase. 
Hideki Electronics, Inc. reserves the right to repair or replace the product at our 
option. 
Copyright (2005) Hideki Electronics Inc. All Rights Reserved. The Honeywell 
Trademark is used under license from Honeywell Intellectual Properties Inc. 
Honeywell International Inc. makes no representations or warranties with 
respect to this product. 
All user manual contents and information are subject to change. 

 

Summary of Contents for TS03











Reviews: