7
7
REMOTE SENSOR
FEATURES
•
Remote temperature transmission to the main unit via 433 MHz
frequency
•
Case can be wall mounted using built-in hanger
•
Selection of the temperature display in Celsius or Fahrenheit
A. LED INDICATOR
•
Flashes once when the remote sensor transmits a reading to the main
unit.
•
Flashes twice when battery power is low.
B. BATTERY COMPARTMENT
•
Holds two AA-size batteries
C. RESET
•
Resets all previous settings
D. WALL-MOUNT RECESSED OPENING
•
Keeps the remote sensor on the wall
E. °C/ °F SWITCH
•
Selects the temperature display in Celsius or Fahrenheit
8
BEFORE YOU BEGIN
•
We recommend using alkaline batteries for the remote sensor and
main unit when temperatures are above 32°F (0°C). We recommend
using lithium batteries for the remote sensor when temperatures are
below 32°F (0°C).
•
Avoid using rechargeable batteries. (Rechargeable batteries cannot
maintain correct power requirements).
•
ALWAYS
install batteries in the
remote
sensor
before
the main unit.
•
Insert batteries before first use, matching the polarity in the battery
compartment
•
Press
RESET
after each battery change with a paper clip or similar
tool.
•
During an initial setup, place the main unit close to the remote sensor.
•
After reception is established (the remote temperature will appear on
the main unit’s display), position the remote sensor and the main unit
within the effective transmission range of 100 feet (30 meters).
•
The remote sensor can be placed
indoors or outdoors
,
depending
on the area where the temperature is intended to be measured
. If
you intend measuring outdoor elements, place remote sensor outdoors
•
The main unit must be placed indoors.
NOTE:
1. Avoid pressing any buttons on the main unit
before the remote readings
are displayed.
2. The effective operating range may be influenced by the surrounding building
materials and how the receiver and transmitter are positioned.
3. Place the remote sensor so that it faces the main unit (receiver), minimizing
obstructions such as doors, walls, and furniture.
4. Though the remote sensors are weather-resistant, they should be placed
