9
8
SPECIFICATIONS
Remote Temperature
Proposed operating range with alkaline batteries:
-20.0
°
C to + 70.0
°
C/-4.0
°
F to + 158
°
F
Proposed operating range with lithium batteries:
-38.8
°
C to + 70.0
°
C/-38.0
°
F to +158
°
F
Temperature resolution: 0.1
°
C/0.2
°
F
LCD display of registered temperature and humidity
Remote Humidity
Proposed operating range: 25% to 95%
Humidity Resolution: 1%
Low battery indicator
Removable temperature probe with 10 feet cable
RF Transmission Frequency: 433 MHz
Maximum number of transmission channels: three (3)
RF transmission range: Maximum 100 feet (30 meters)
Temperature and humidity transmission cycle:
approximately 45 seconds
Wall Mount or Desktop option
Power
2 AA size (UM-3) 1.5V batteries (not included)
Dimensions
2.37(L) x 4(H) x 1(D) inch
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modification to this unit not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment had been tested and found to comply
with the limits for a Class B Digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment, installed and used
in accordance with the instructions, may cause harmful
interference to radio communications.
There is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to improve or correct turning the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician
for help.
DECLARATION OF CONFORMITY
We
Name: Hideki Electronics, Inc.
Address: 7865 SW Mohawk, Tualatin, OR 97062
Telephone No.: 1-503-612-8395
declare that the product
Product No.: TS33F
Product Name: Temperature and Humidity Sensor with Probe
Manufacturer: Hideki Electronics Ltd.
Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk Road,
Kwai Chung, New Territories, Hong Kong
is in conformity with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including
interference that may cause undesired operation.
The information above is not to be used as a contact for
support or sales. Please call our customer service hotline
(refer to the Standard Warranty Information) for all
injuries instead.
