2
SET UP
12. Warning
– It is normal for the plug to feel warm
to the touch; however, a loose fit between the
AC outlet (receptacle) and plug may cause
overheating and distortion of the plug. Contact a
qualified electrician to replace loose or worn outlet.
13. Warning
– To disconnect the heater, first turn off
the product, then grip the plug body and pull it
from the wall outlet.
DO NOT
pull by the cord.
14. Warning
–
DO NOT
insert or allow foreign objects
to enter any ventilation or exhaust opening as
this may cause electric shock, fire, or damage
to the heater.
15. Warning
– To prevent a possible fire,
DO NOT
block air intakes or exhaust in any manner.
DO NOT
use on soft surfaces, like a bed, or where
openings may become blocked.
16. Warning
– A heater has hot and arcing or
sparking parts inside.
DO NOT
use it in areas
where gasoline, paint or flammable liquids are
used or stored.
17. Warning
– Use this heater only as described in this
manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or
injury to persons.
18. Warning
–
ALWAYS
plug heater directly into
a wall outlet/receptacle.
DO NOT
use with an
extension cord or relocatable power tap
(outlet/power strip).
19. Warning
–
NEVER
tamper with this product
or attempt to fix it. Any tampering with, or
modification of this product can result in serious
injury, death, or fire.
DO NOT
open. Risk of electric
shock. There are no user serviceable parts inside.
20. Warning
–
DO NOT
remove product labels
that contain warnings or safety instruction.
21. Caution
– The output of this heater may vary
and its temperature may become intense enough
to burn exposed skin. Use of this heater is not
recommended for persons with reduced sensitivity
to heat or an inability to react to avoid burns.
22. Caution
– Before cleaning, or storage, or when
not in use, turn the product’s controls to the OFF
position and unplug the heater from the electrical
outlet and allow to cool.
23. Caution
– Place the heater on a firm, level, open
surface free from obstructions and at least 3 feet
(0.9m) away from any combustible materials.
DO NOT
use on an unstable surface such as
bedding or deep carpeting. Be sure the heater
is not in a position where it may be tripped over
by small children or pets.
24. Caution
– If your home has aluminum wiring
have a licensed electrician check your receptacle’s
connections. When using a 1500 watt heater,
aluminum wire connections can cause a safety issue.
25.
SAVE THESE INSTRUCTIONS
The Honeywell TurboForce® Heater Fan requires no assembly. Simply unpack heater and save all packaging
materials for off-season storage.
Place the heater on a firm, level, open surface free from obstructions and at least 3 feet (0.9m) away from
any wall or combustible material.
DO NOT
use on an unstable surface such as bedding or deep carpeting.
BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY BE TRIPPED OVER BY CHILDREN OR PETS.
