Security (cont’d)
14
To bypass zones do the following:
ICON ACTION
NOTES
1. From the “Home” screen, press the
SECURITY
icon.
2. Press the
MORE CHOICES
icon.
Note: If any zones are bypassed or faulted, a Display Faults icon is also
displayed on this screen.
3. Press the
SHOW ZONES
icon.
While the keypad is requesting and receiving the zone data from the control
panel, the screen displays "Please Wait!". Then the zones, along with their
current status, are displayed.
4. Highlight the zone(s) to be bypassed and
press the
BYPASS SELECTED
icon.
5. Enter your 4-digit user code.
Note: If zones have already been bypassed, the top of this screen indicates
“Ready Bypass”.
The screen is displayed with the instructions "To Bypass Zones, Enter Code".
6. Press the
BACK
icon to return to the
“Arming” screen.
The "More Choices" screen is displayed
showing the system status as Ready-
Bypass.
How to Clear Bypassed Zones
A bypassed zone is automatically unbypassed when you disarm the system. If a zone is bypassed, you can remove the bypass as
follows:
ICON ACTION
NOTES
1. Press the
SHOW ZONES
icon.
While the keypad is requesting and receiving the zone data from the control
panel, the screen displays "Please Wait!". Then the zones, along with their
current status, are displayed.
2.
Press the
CLEAR BYPASSES
icon.
3.
Enter your 4-digit user code.
The "More
Choices" screen is displayed showing the
system as
Ready to Arm.
Note: If the system is armed and you unbypass a zone, it disarms the system. If
zones are still faulted (not ready) the system will indicate the status as “Not Ready
Fault”.
How to Disarm the System
IMPORTANT:
If you return to your home or business and the main burglary sounder is on, DO NOT enter the premises, but call
the police from a nearby safe location. If you return to your home or business after an alarm has occurred and the main sounder
has shut itself off, the keypad beeps rapidly upon entering, indicating that an alarm has occurred during your absence.
LEAVE
IMMEDIATELY and CONTACT THE POLICE
from a nearby safe location.
The system may be disarmed using either of two methods. One method is employed when you enter the premises and the other is
when you have been in the premises with the system armed (i.e., Stay and Night arming modes).
Summary of Contents for Tuxedo
Page 2: ......