Security (cont'd)
15
To disarm the system when entering the premises:
The keypad automatically displays the Entry Delay Active screen when you enter the premises:
ICON ACTION
NOTES
1. Enter your 4-digit user code.
The partition is disarmed and the "Arming" screen is displayed showing the
system as Ready to Arm.
Note: If you have a commercial system and a time window has been defined
for when you may disarm the system, the system does not disarm if you are
outside that time window.
To disarm the system when already in the premises:
ICON ACTION
NOTES
1. Press the
Disarm
icon.
2. Enter your 4-digit user code.
To disarm Multi-Partitions do the following:
ICON ACTION
NOTES
1. From the “Home” screen, press the
Security
icon.
2. Press the
Arm Multi-Partition
icon.
3. Press the
Disarm
icon.
4. Enter your 4-digit user code.
5. Highlight the partition(s) to disarm and press
OK
, or press
ALL
to disarm all
partitions.
The keypad displays “Multi-Partition Arming”.
How to Check the Status of Other Partitions
This system supports between one and eight Partitions (depending on the system.) Partitioning enables a single physical alarm
system to control up to eight areas of protection (partitions) depending on the system you have purchased. Each Touch-Screen
keypad is assigned a default partition for display purposes, and shows only that partition's information.
Note:
A letter “H” following the partition name or number indicates that this is the default partition for the keypad.
For example, if your physical site is a four-apartment housing unit, your alarm system may be configured with four partitions.
Each apartment’s zones (door, windows, smoke detectors, etc.) are assigned to separate partitions, giving each apartment
independent arming/disarming control of its own partition (area). A landlord or manager may be granted access to all partitions,
so he/she can control the entire system.
If a user is so authorized, a keypad or other keypad in one partition can be used to perform system functions in another partition.
(Note that only those partitions authorized and programmed by the installer can be accessed in this manner.)
Summary of Contents for Tuxedo
Page 2: ......
