19
Setup
Setup allows you to make changes to the way your keypad is operating. You may access the
Brightness and Volume, Display
& Audio Setup
,
IP Setup, System Setup
and
System Information
from the "Setup" screen.
Brightness and Volume Control
From the "Home" screen, a
ccess the "Setup" screen as follows:
ICON ACTION
NOTES
1. Press the
Setup
icon.
2. Move the
Brightness/Volume
slide bar up or
down to increase or decrease settings.
If changes are made, when you exit a Settings Changed! pop-up window
is displayed asking “Remember New Settings?“
Yes saves the change.
No discards the change
.
Display & Audio Setup
You may access
Operation Modes; Backlight Off After
time,
To Homepage After
time,
Auto Slideshow After
time and
Clean Screen
from Display & Audio Setup.
Operation Modes
Operation modes provides access to
Chime Mode, Voice Mode, and Voice Chime
which allows you to turn the keypad chime
mode and voice mode on or off.
•
Chime
Mode
–
Keypad chimes whenever a door or window is open.
•
Voice Mode – Keypad voice annunciates whenever a change in system status occurs.
•
Voice Chime – The chime mode and voice mode are in effect with the chime beeps followed by voice annunciation.
Access the "Operation Modes" screen as follows:
ICON ACTION
NOTES
1
. From the “Setup” screen, press the
Disp &
Audio Set
up
icon.
2. Enter your “Authorized Code", if required.
If the Chime Mode and Voice Mode are both selected, the Voice Chime is
automatically selected.
3. Select
Chime Mode
or
Voice Mode
to turn the
mode on or off.
4. Press the
HOME
or
BACK
icon after making
your selection.
It may take a few seconds for the Chime Mode to take effect.
When the keypad exits the “Operation Modes” screen, your selection is
saved.
Summary of Contents for Tuxedo
Page 2: ......