Setup (cont'd)
21
•
The keypad case and sensors should be carefully dusted with a dry soft cloth.
Do not spray water or any other fluid on
the units.
System Information
To view the current software version installed on your system, and verify connectivity, do the following:
ICON ACTION
NOTES
1. From the “Home” screen, press the
Setup
icon.
2. Press the
System Info
icon.
The Interface Name, Host Name, MAC Address, CRC, IP Address, Broadcast
Address, and NetMask are also displayed.
Software upgrades may be available for this product. If necessary visit the
Tuxedo Toolkit at:
http://www.tuxedotouchtoolkit.com/index.html
.
IP Setup and Network Connections
Web Server/Hosting
The Tuxedo Touch keypad offers built-in web hosting capability to access your Security and Home Automation System via any
web enabled device. The Tuxedo Touch keypads IP Address is used on a standard web browser to control user functions.
Supported Browsers include:
iPhone
TM
Version iOS4, i-Pad
TM
Version iOS4 and iOS5, Galaxy – Android 2.3, Internet Explorer 8, Safari
®
5.0.2. and Webpage
support - iOS 6 and Google-TV.
Supported Routers include:
1. Netgear Model: WNR2000V3; Mode: None, WEP (64 bit & 128 bit), WPA personal, WPA2 personal, and Tx Key 1, 2, 3, 4.
2. D-Link Model: DIR-632; Mode: None, WEP, WPA personal, and WPA2 personal.
3. Linksys
®
Model: WRT54GL; Mode: None, WEP, WPA personal, and WPA2 personal.
UL Note: Web Server/Hosting is not Listed for use in UL installations.
Remote Arming/Disarming/Programming is not to be used in UL Listed installations.
IP Address Setup
In most cases, IP addresses are assigned ‘automatically’ (
Automatic IP Addre
ss). Or, you may require a
“Static”
(Fixed) IP
Address
that can be found by accessing your router. Refer to your router instructions. To connect a mobile device to the Tuxedo
Touch keypad, view the “Local System Control (Tablet/Smartphone)” training video, and then do the following:
ACTION NOTES
1. At your
Smart Phone
or
Tablet:
a) Navigate to the
Settings
feature.
b) Turn
ON
the “Wi-Fi” setting and select the router to
connect to. Enter a name and password, if required.
c) Open the browser and enter the IP Address displayed on
the keypad into your browser.
Or,
2. At your
PC
:
a) Open the browser and enter the IP Address displayed on
the keypad into your browser.
After proper connection:
•
Access to basic arming commands is available if using a Smart
Phone or Tablet browser.
•
Full access to keypad options is available if using a PC browser.
•
If left inactive, Web connections disconnect after 10 minutes.
The IP Address is displayed in the lower left-hand corner on the
Tuxedo Touch Keypad “Home” screen.
NOTE: If using an iPad, iPhone or PC browser with low bandwidth on
the mobile type theme, to switch between normal theme and mobile
theme, go to the Home page on the Web browser and press the
Switch Theme icon; the user interface displays the mobile theme.
Web themes for Android phones and Tablets are not supported.
Summary of Contents for Tuxedo
Page 2: ......
