Setup (cont'd)
23
Setup a WLAN (Wi-Fi) Connection
From the
IP Setup
screen, add a WLAN network connection as follows:
ICON ACTION
NOTES
1. At the Tuxedo Touch keypad:
a) Press the
WIFI ON
button.
- Use the scroll bar to locate a network from
the list of Wi-Fi Networks to connect to and
highlight that field.
- Or, scroll to the bottom of the list and select
Add Network.
Highlight each field to enter
the required information for SSID, Security
Mode, Passphrase/Shared Key, and Port # on
the “Data Entry Keyboard” and press
GO
.
2. Press the
Save
icon. Pressing Save when
changing the port number resets the keypad.
3. At your PC, Smart Phone or Tablet browser,
start your browser and enter your IP Address.
•
If left inactive, Web connections disconnect after 10
minutes.
A pop-up window displays:
“This will switch off LAN Network, do you want to continue?” Yes or
No.
Use the Data Entry Keyboard to enter the required information.
•
Press the “up arrow” key to switch to capital letters.
•
Press the Space key to add a space between characters.
•
Press the x key to delete/backspace.
•
Press the ABC/.?123 key to switch between numerals and
symbols/characters.
•
Press GO to return to the IP Setup screen.
A pop-up window displays: “Network Details Saved”
A pop-up window displays the message: “Settings saved.”
Select OK to save.
Note: To change the default port number (6280), press the field next to port
number and on the data entry keyboard enter a secondary port number
between 5000-65534. Press GO and then press Save.
A pop-up window displays: “Success Network Details Saved Port
number changed.” “Keypad is going to reset”
The keypad will reboot with the newly configured port number.
Account Setup
Account setup provides a browser log-on page for higher security when viewing from a web enabled device or PC, on a different
sub-net. To set up a user account, do the following:
ICON ACTION
NOTES
1. Press the
Account Setup
button.
2. If required, highlight the User
Name/Password fields on the list and enter
the data for each on the “Data Entry
Keyboard”; press
GO
.
3. Press the
Save
icon. The new user is
displayed on the screen.
4. Press the
Clear
button
to clear the User
information.
A Confirmation window displays the message:
Settings saved.
The ENABLED button is displayed when a successful network connection
is completed.
Summary of Contents for Tuxedo
Page 2: ......
