Multi-Media (cont’d)
26
ICON ACTION
NOTES
4. Press the
Slide Delay
arrow to select the time
interval that you want to allow between each
photo being viewed. Choose from (5, 10, 15, or
20 seconds).
To set a picture as wallpaper:
1. Use the slide bar to scroll through the list of
pictures and highlight the file you want to be
displayed on the keypad screen.
2. Press the
Set Wallpaper
icon; view your
selection from the “Home” screen.
Press the TOP button to move up one level in the directory.
Press the OPEN button to view larger images and/or open directories,
select from the list of stored images.
Press the CLEAR ALL button to clear all pictures from the current slide
show rotation.
NOTE: When viewing wallpaper displays, the Home screen icons can be
minimized by pressing the “Minimize Home” icon. Press the “Maximize
Home” icon to maximize the Home screen icons.
Picture Icons
Play Image
Previous
Image
Next Image
Add Image
Set
Wallpaper
Minimize Home
Maximize Home
Camera Setup
The Camera feature allows you to enroll cameras and view up to four cameras at one time using the quadrant view feature. If
using existing (mounted) cameras, go to Step 4 below. If this is a first time setup, you will need to Discover/Configure the
cameras prior to mounting and then follow the steps below.
ICON ACTION
NOTES
1. Connect a Cat5/6 cable to the back of your
camera (LAN) and connect the opposite end to
the Ethernet on your router.
2. Apply power to the Camera. It may take a few
seconds for initial power-up of camera.
3. Press the
Multimedia
and
Camera
icons (or
press the
Camera
icon from the “Home” screen)
and then press the
Camera Setup
icon. The
“Camera List” screen is displayed.
4. Press the
Discover
icon to locate the camera.
Once located, highlight the camera address, and
press the
Edit
icon and go to Step 7 below.
Initial camera setup cannot be performed over a wireless connection.
Notes:
1. QuickTime
®
media player must be installed on your PC.
2. Max. suggested camera resolution = 640 x 480.
Max. suggested frame rate = 5 fps.
3. Camera viewing is not compatible if using Opera web browser.
IMPORTANT: Use the web browser to view cameras for non-security
purposes only. Camera streams viewed from the web browser can stop
without indication due to network connection issues.
Use the Data Entry Keyboard to enter all required information.
•
Press the Up Arrow key to switch to capital letters
•
Press the X key to delete
•
Press
the
ABC/.?123 key to switch between numerals and
symbols/characters.
•
Press GO to return to the “Add New Camera” screen.
Summary of Contents for Tuxedo
Page 2: ......