Automation (cont'd)
39
Options for adding a Trigger – After each selection press SAVE!!!
In the “Trigger” box, press the
Add
icon.
To set the time, press the TIME button and “Set the occurrence” to Repeated, or Once. If “Repeated” was selected, choose the desired days of the
week; If ONCE was selected, Enter Date. The Time can be set to edeute automatically at Sunrise or Sunset by pressing the Sunrise/Sunset option.
Note: The Sunrise/Sunset feature is dependent on the “Region” selected in the “Weather Forecast” section and requires internet access for accuracy.
Press the BY CLOCK button (to limit the scene to execute only from within a specified time window) and press on the “hour/minutes” displayed, to
enter the desired time on the data entry keyboard. Press on AM/PM to change the setting.
To set a security mode, press the
SECURITY
button and select:
DISARM
,
AWAY
(triggers upon arming away),
STAY
,
NIGHT
(for residential
panels only),
AWAY SECURED
(triggers when exit delay has expired) or
ALARM.
To set the thermostat settings, press the
THERMOSTAT
button to select the
Thermostat Devices
from the drop down menu. Use the
ABOVE
an
d BELOW
button to increase/decrease the temperature range or press the
Temperature Value
box and enter 2 digits for the desired
temperature
.
Note:
Test thermostats first to ensure proper function in the “Scene” feature.
To set the door lock status, press the
DOOR
button to select a
Door Device
from the drop-down menu (see notes below). Select
LOCKED,
UNLOCKED
o
r CODE UNLOCKED
.
To set the zones, press the
Zones
button and select a zone from the drop-down menu. Select
Restore
,
Alarm
or
Fault
.
Note: Do not use zone Restore in the
Condition
field.
Options for adding an Action – After each selection press SAVE!!!
In the “Action” box, press the
Add
icon.
To set the security mode, press the
SECURITY
button and select:
DISARM
,
AWAY
,
STAY
,
NIGHT
. Enter
User Code,
if required.
To set the light on/off, press the
LIGHT
button and select a
Light Device
from the drop down menu; set the action to
ON / OFF.
To set the thermostat settings, press the
THERMOSTAT
button and select a
Thermostat
from the drop-down menu. Press the
Set Mode
button
to set the Action to
“Off”, “Heat”, or “Cool”. Press the
Set Energy
button and select from “Normal” or “Saving” energy mode. Press the
Set
Point
button to enter a set point value for “Heat Point” and “Cool Point”.
Note:
Test thermostats first to ensure proper function in the Scene
feature.
To set the door lock status, press the
DOOR
button and select a
Door Device
from the drop-down menu (see notes below). Set the action to
LOCKS
or
UNLOCKS
Notes:
1. Motorized door lock bolts physically lock and unlock when activated, but if the door lock installed is a non-motorized type,
activation allows the door to be manually unlocked without a key
.
See “
Compatible Devices
” section for further information.
2.
Some thermostats do not update temperature status automatically (i.e., Wayne Dalton).
3. When using a Kwikset Smartcode electronic deadbolt door lock (in a Scene that is programmed to trigger when unlocked) the
Scene does not trigger if using a key; enter a user code.
Create a Group
The Group Setup feature enables multiple devices to function as a group. Follow the procedure below to create a Group.
ICON ACTION
NOTES
1.
Press the
Automation
icon and then press the
Group Setup
icon.
2.
Press the
Add
icon and enter a Group Name
on the “Data Entry” keyboard.
Group names (i.e., All, etc.) are displayed across the top to the screen.
Use the Data Entry Keyboard to enter all required information.
•
Press the Up Arrow key to switch to capital letters
•
Press the X key to delete
Summary of Contents for Tuxedo
Page 2: ......