U2 COMBINATION VIEWING HEAD AND SIGNAL PROCESSORS
66-2071—02
2
Table 1. Available models and associated features.
* The U2-1010-PF-050 has a 50-ft (15m) pigtail and the U2-1010-PF-100 has a 100-ft (30m) pigtail.
All models include the following:
1.
Electronic check (no mechanical shutter) for self-check
of the system.
2.
24 VDC input
3.
Ten (10) flicker frequency filters for solid state UV and IR
sensor (model dependent)
4.
Gain selection
5.
Eight (8) different file configurations
6.
Resettable fuses
SPECIFICATIONS
Power:
22-26 VDC, 120 mA max
Output relay contacts SPST:
2 A, 30 VDC or 250 VAC
Ambient temperature:
-40 to 70 ºC (-40 to 158 ºF)
Enclosure:
IP66
NOTE: Optional air cooling for housing is available for appli-
cations with higher ambient temperatures. Please
contact your distributor or Honeywell for assistance.
Weight:
2.8 kg (6.1 lbs)
Physical Dimensions:
Diameter: 11.7 cm (4.6 inches)
Length:
15.5 cm (6.1 inches)
Paint:
Silicone-free powder coat
Mounting/Process Connection:
1” NPT female
NOTE: Refer to for Fig. 9 and Fig. 10 mounting examples.
Pipe Fit Conduit Connection (-PF):
3/4
”
NPT
FFRT:
1-3 second nominal, 2-4 second maximum
Time Delay On:
0-3 seconds
Fuses:
Automatically resettable
NOTE: If one of the devices is triggered due to high power
draw, disconnect power from the system for a mini-
mum of 30 seconds then reconnect power.
Model
Connector
Connection
Pipe Fit Connection
(3/4 in. NPT)
UVTron
Sensor
SSUV Sensor
IR Sensor
U2-1010
X
X
X
X
U2-1010-PF
X
X
X
X
U2-1010-PF-050*
X
X
X
X
U2-1010-PF-100*
X
X
X
X
U2-1012
X
X
U2-1012-PF
X
X
U2-1016
X
X
U2-1016-PF
X
X
U2-1018
X
X
X
U2-1018-PF
X
X
X
