Standalone Mode
34
HRHD DVR
Keyboard Setup
The HRHD DVR function setup is just like the FUSION DVR function setup except that the
HRHD type must be selected.
Operations
DVR selection
Pressing a number followed by the
DVR
key selects a DVR to control.
Number entry (for entering passwords)
To enter numbers,
press and hold
the
Alt
key and then press the number keys.
DVR menus
Press
F1
to bring up the password screen. Press and hold the
Alt
key, and enter the password.
Then press
Ent
to start the access to the DVR set-up menus.
Navigation between these menu items is achieved by using the function keys indicated in the
table below:
Press… To…
Slider_Up or F2
Move up
Slider_Down or F7
Move down
Slider_Left or F6
Move left
Slider_Right or F8
Move right
F1
Exit the current menu. (If the user presses
F1
when in the ‘Set-up screen’, the DVR exits
the menus and returns to normal operation.)
or enter the menu
Ent
select an option
Picture control
The following table indicates the keys used for picture control:
Key Function
Split Display
Seq Sequence
F10 Freeze
Press
Split
to select the next display setting (in the cycle of ‘4x4’, ‘3x3’, ‘2x2’ and ‘PIP’).
Use the
Slider_Left
and
Slider_Right
keys to cycle through the other cameras when
displaying 2x2 and 3x3 displays.
The screen layout of the multi-camera displays can be set by pressing
Ent
, then
Slider_Up
,
Slider_Down
,
Slider_Left
or
Slider_Right
keys to select an active camera (highlight box
displayed). Then press one or two of the number keys (to enter a legal camera number)
followed by the
Camera
key to select that number camera to be displayed in that cameo.
Summary of Contents for Ultrakey Lite
Page 1: ...P N 800 00530 Rev A Honeywell Ultrakey Lite User Guide ...
Page 2: ......
Page 13: ...Honeywell 9 ...
