WEBVISION™
95-7769—01
16
5.
Click the
Access on this WebVision
tab. The
Access
on this WebVision
page appears. You can select
various options from Device Access, Schedule Access,
and Locations View Access. Check Select All to select
all the options simultaneously.
Use this option to assign customized access to users.
Fig. 23. Access on this WebVision page.
6.
Click Save to save the user properties.
To edit a user:
Select a user from the User list, and make the required
changes as explained in the above section.
To delete users:
NOTE: Any user who has user management privileges can
add or remove a user.
1.
On the
Users
page, click the name of the user you want
to delete from Users Name column.
2.
Click
Delete
. A confirmation message appears.
3.
Click
OK
to confirm the deletion.
IMPORTANT
SysAdmin is a user account with contractor
privileges that cannot be deleted. A SysAdmin's
privileges cannot be altered. This is to ensure that
there is at least one contractor available in the
system.
To enable/disable a user:
• Click
Enable
to enable a user.
• Click
Disable
to disable a user.
Devices
Device List
You can view all the devices present in WebVision. All the
information related to name, type, status, and so on is
available.
To view the list of devices:
1.
Click the
Devices
tab. The
Device List
page appears.
The following information appears in a tabular format:
Fig. 24. Devices Tab - Device List page.
TIP:
Use Filters to view the required list.
Use one of the following filter options to search for the
required device: Channel, Device Name, Device Type,
Status, Mode.
•
Device Name
– Name of the device.
•
Device Type
– Type of the device.
•
Status
– Status of the device, it can be online or
offline.
•
Neuron ID
– Each L
ON
W
ORKS
Controller node has
a 48 bit unique identifier, called the Neuron ID. This
is used to address the nodes on the L
ON
W
ORKS
network.
•
Mode
– Mode of the device, it can be auto or
manual.
•
Subnet/Node ID
– A mask that is used to determine
the subnet of a network. Subnetting enables the
network administrator to further divide the host part
of the address into two or more subnets.
•
Channel
– The channel on which the device is
present.
•
Synced On
– Date and time on which the device is
last downloaded or uploaded.
•
Replicate
– Click Replicate to replicate the device
settings.
To add a device:
1.
Click the
Devices
tab. The
Device List
page appears.
2.
Click .
The
Add Device
dialog box appears.
Enter the following details:
Fig. 25. Add Device dialog box.
