Wireless Remote Control
5
System settings
Press a
SYSTEM
button to select:
•
Heat:
Thermostat controls only the
heating system.
•
Cool:
Thermostat controls only the
cooling system.
•
Off:
Heating and cooling systems
are off.
Press and hold
HEAT
or
COOL
for 3 seconds
to select Auto Changeover (thermostat
automatically selects heating or cooling
depending on the indoor temperature).
In Auto Changeover mode, you can
press
HEAT
or
COOL
to display or adjust the
settings for each system.
To exit Auto Changeover mode, press
and hold
HEAT
or
COOL
for 3 seconds.
Press to select
Press and hold either to select
AUTO CHANGEOVER
8:03
AM
HEAT
COOL
OFF
•
8:03
AM
HEAT
COOL
OFF
•
AUTO
Note:
The Auto Changeover option
is available only if programmed by
the system installer.
Note:
Emergency Heat can only be
set at the thermostat.
