10
Override Locked Scanner
If you need to replace a broken or lost scanner that is linked to a
base, scan the
Override Locked Scanner
bar code with a new
scanner, and place that scanner in the base. The locked link will
be overridden; the broken or lost scanner’s link with the base will
be removed, and the new scanner will be linked.
Unlinking the Scanner
If the base has a scanner linked to it, that scanner must be
unlinked before a new scanner can be linked. Once the previous
scanner is unlinked, it will no longer communicate with the
base. Scan the
Unlink Scanner
bar code to unlink a scanner.
Trigger
The following bar codes will allow you to use the scanner in
Manual Trigger - Normal Mode
(need to press the trigger to
read) or
Presentation mode
(the scanner is activated when it
“sees” a bar code).
Override Locked Scanner
Unlink Scanner
Manual Trigger - Normal
(Default)
