Honeywell Process Solutions
Wireless Dual Analog Input Interface Transmitter
Rev. 8
User Manual
III
July 2012
Table of Contents
Section 1: Introduction ____________________________________ 1
1.1: Using This Manual
1
1.2: About the Device
2
1.3: Unpacking
2
1.4: Software Compatibility
2
Section 2: Quick Start _____________________________________ 3
Section 3: Installation _____________________________________ 4
3.1: Mechanical Installation
4
3.1.1: Transmitter Positioning
4
3.2: Testing Communications
7
3.2.1: Transmitter RSSI Diagnostics
7
3.2.2: Link Test
8
3.3: Electrical Installation
13
3.3.1: Electrical Specifications
13
3.3.2: Wiring the Voltage/Current Input
13
3.3.3: Wiring the Input Switches
14
Section 4: General Configuration __________________________ 15
4.1: Transmitter Displayed Messages
15
4.1.1: The Read-Only Sequence
15
4.2: Overall Configuration Menu Map
16
4.3: Setting the Transmitter Tag Name
16
4.4: Setting a User Password
17
4.5: Resetting All Transmitter Settings
17
Section 5: Configuring the RF Communications ______________ 18
5.1: RF Channel Selection
18
5.2: RF Baud Rate Selection
19
5.3: RF Identification Selection
19
Section 6: Configuring the Sampling and Transmission Rates ___ 21
6.1: Selecting the Normal Transmission Rate
21
6.1.1: Configure the Normal Transmission Rate from the Transmitter
22
6.1.2: Configure the Normal Transmission Rate Using WMT
22
6.2: Selecting the Normal Sampling Rate
23
6.2.1: Selecting the Normal Sampling Rate from the Transmitter
24
6.2.2: Configure the Normal Sampling Rate Using WMT
24
6.3: Selecting the Abnormal Transmission Rate
25
6.3.1: Configure the Abnormal Transmission Rate from the Transmitter
25
6.3.2: Configure the Abnormal Transmission Rate Using WMT
26
6.4: Selecting the Abnormal Sampling Rate
27
6.4.1: Configure the Abnormal Sampling Rate from the Transmitter
27
6.4.2: Configure the Abnormal Sampling Rate Using WMT
28
6.5: Setting the Smart Rate Threshold
29
6.5.1: Configure the Smart Rate Using WMT
29
6.6: Selecting the Normal Upper and Lower Values
30
6.6.1: Configure the Upper and Lower Limits from the Transmitter
30
6.6.2: Configure the Upper and Lower Limits Using WMT
31
6.7: Selecting Rates, Thresholds, and Deadbands via the Software
32
Summary of Contents for XYR 5000 Series
Page 2: ......