Honeywell YJ-HF5000, Quick Start Manual

If the bar code is highly reflective (e.g., laminated), you may need to 
tilt the scanner at an angle so the bar code can be scanned.

Standard Product Defaults

The following bar code resets all standard product default settings.

USB Serial Interface

Scan the following code to program the scanner to emulate a regular 
RS232-based COM Port.  If you are using a Microsoft® Windows® 
PC, you will need to download a driver from the Youjie website

(www.youjieaidc.com)

.  The driver will use the next available COM 

Port number.  Apple® Macintosh computers recognize the scanner 
as a USB CDC class device and automatically uses a class driver. 

Note: No extra configuration (e.g., baud rate) is necessary.

Keyboard Country

If your interface is USB Keyboard or Keyboard Wedge, your 
keyboard layout default is a US keyboard. To change this layout, 
refer to the chart below for your keyboard country. Scan the 

Program 

Keyboard Country

 bar code below, then scan the numeric bar 

code(s) for the appropriate Country Code from 

page 11

, then scan 

the 

Save

 bar code. 

Standard Product Defaults

USB Serial Interface