Honeywell Zio TR70, Operating Manual

ZIO

®

/ZIO PLUS LCD WALL MODULES

5

63-2719—03

General Settings

Using Fig. 6 and Table 4 as a guide, configure the General 

Settings. An image of the selected model and its capabilities 

updates in the display at the bottom of the window.

Fig. 6. General Settings screen.

If you are creating a customized configuration or modifying a 

pre-programmed configuration, continue with “Categories and 

Parameters” on page 5.

If you are using a pre-programmed configuration as is, 

continue with “Preview” on page 17.

Categories and Parameters

I

 Categories 

and 

Parameters selection from 

Wizard Menu

The categories and parameters menu item allows you to 

create, edit, and delete categories and parameters.

ADDING A CATEGORY

Fig. 7 shows the categories listed in tree format in the main 

window where you can add, edit, or remove them. In the 

bottom pane, Category Preview (at the bottom of Fig. 7) 

shows the current selected item. 

Clicking the Add Category button displays a details pane 

below the category and parameter tree as shown in Fig. 8.

NOTE: You can use the Remove button to delete unused 

categories and parameters to free up memory 

space.

Fig. 7. Category Preview.

CATEGORY DETAILS

When you select a category from the Categories tree list and 

click the Edit button, a details pane displays for that category 

(see Fig. 8 on page 6). 

Here you can enter a category name and description. The 

number of parameters in this category are shown. The 

description text you enter is loaded to the controller but cannot 

be seen in the preview.

Table 4. General Settings.

Item

Function/Use

Block Name

The wizard displays S-Bus Wall Module.

Wall Module

Type

Select the appropriate type (Temperature 

Only, or a combination of Temperature, 

and/or Humidity) from the drop down list.

Model Options

Click LCD Display.

Select Model

Select the appropriate model, TR70, 

TR71, or TR75, from the drop down list.

Wall Module

Address

Select a unique address for each TR70 

Series devices connected to the Spyder. 

TR70 can be set from 1-5 and TR71/

TR75s can be set from 1-10. The 

address selected must match the 

address setting at the wall module (using 

the rotary switches). If setting the TR71/

TR75 rotary switch to 0, set the address 

to 10 in the configuration tool.

Time Display

Format

Select 12 or 24 hour format.