Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited.
Hong Kong RFID Limited
Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong
Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email:
info@hk-rfid.com
P.23
-Fragment Threshold: This value specifies the maximum size for a
packet before data is fragmented into multiple packets. If you
experience a high packet error rate, you may slightly increase the
Fragmentation Threshold. Setting the Fragmentation Threshold too
low may result in poor network performance. Only minor reduction
of the default value is recommended. In most cases, it should remain
as its default value of 2346.
-RTS Threshold: When you encounter inconsistent data flow, only
minor reduction of the default value, 2347, is recommended. If a
network packet is smaller than the preset RTS threshold size, the
RTS/CTS mechanism will not be enabled. The Router frames to a
particular receiving of a data frame. After receiving responds with a
Clear to Send right to begin transmission. The as its default value of
2347.
-Beacon Interval: The default value is 100. Enter a value between 1
and 65,535milliseconds. The Beacon Interval value indicates the
frequency interval of the beacon. A beacon is a packet broadcast by
the Router to synchronize the wireless network.