background image

                               

HONGDA HOLDING WATER TECHNOLOGY CO.,LTD   

 

Service hotline: Tel: +86-577-27885553   

Http://www.sparklingwater.info

    E-mail: Stanley@hongda.info 

 

Product introduction 

              Thank you for purchasing atmospheric water generator. It is an advanced drinking water equipment for household 
and  office  use,  especially  for  water  provision  on  the  coastland,  islands  and  ships.  By  making  use  of  the  most  advanced 
technology,  this  water  dispenser  integrates  the  air  water  condensing  system,  water  filtering  and  disinfecting  system,  and 
water heating and cooling system, which has  greatly improved the water intaking by air and satisfying the  water needs in 
pulic places and other environments.   
 
                This machine controled by microcomputer system,which makes sure all the parts of the machine working normally. 
With internal prevent interference function and filter system protection function moreover can stop work automatically when 
the machine filter system break down. 
 
                This machine has ultraviolet radiation sterilization system, to ensure the completely destroy the bacteria and 
microorganisms.   
 
                This machine uses the excellent components to ensure the operation reliability of the entire machine.   
 
                The filter system adopts the integrated module design, thus making change of the filter element more convenient.   
 

Operating Principle 

This machine mainly makes the water from the humidity in the air. In other words, it totally relies on the water vapour in 

the air to make water. The best water making can only be achieved under the ideal environment where the humidity is around 
70

--80

. Water also can be made in places with low humidity, but the speed is slow. This is also the same case for places 

with high humidity and low temperature. So it is better to test the humidity of every position in a room before the machine 
placed. In a living house, positions near the kitchen or window, or spacious places, will see high humidity.   

If  the  air  water  dispenser  wants  to  reach  the  best  operating  state,  the  temperature  of  ambient  environment  is  very 

important, with the ideal temperature of 24

--29

. However, this does not mean that the dispenser will fail to work in places 

where the temperature is higher or lower. More drinking water will be produced at faster speed under ideal temperature. So it 
is necessary to measure the indoor temperature before placing the dispenser.   

As water is made by converting the water vapour in the air, this machine will become a very powerful humidity intaker. 

Therefore, for the sake of health, please use this machine only in rooms where the humidity is ensured, or when the window 
is opened and the indoor and outdoor air exchange is available.   

 

VFD display screen 

 

 

Parts illustration 

Summary of Contents for A2T

Page 1: ... info E mail Stanley hongda info 1 USER USER MANUAL MANUAL Firstly Thanks for choosing our product Please read this Instruction Manual carefully before using Please take good care of this Instruction Manual for future reference Suitable for The large scale atmospheric pure water dispenser Model A2T ...

Page 2: ...ange of the filter element more convenient Operating Principle This machine mainly makes the water from the humidity in the air In other words it totally relies on the water vapour in the air to make water The best water making can only be achieved under the ideal environment where the humidity is around 70 80 Water also can be made in places with low humidity but the speed is slow This is also th...

Page 3: ...level bright After the machine works for a period of time first time runs need more 24 hours when the 5 lights at the bottom of the water level all bright now you can press cooling button starts to cool and twinkle after the water temperature reach the set temperature shows bright Remarks you can press cooling button to stop cooling when you don t need cold water which can improve the ability of p...

Page 4: ...bracket and the connecting pipe at the top of film shell Turn down the film shell end counter clockwise pull out the film and put the new filter element to the film shell install the film shell end clockwise and connect the water pipe It is recommended that the film be changed every 24 26 months Note For new installed water dispenser if the RO film has not been installed in the RO film shell befor...

Reviews: