HONGDA HOLDING WATER TECHNOLOGY CO.,LTD
Service hotline: Tel: +86-577-27885553
Http://www.sparklingwater.info
E-mail: Stanley@hongda.info
3
I
nstallation & Operation
1. Before this machine installed, please choose a position with good humidity, put horizontally and and keep the distance
80cm left/right and 20cm back to make the air outlet and inlet vacant, so as to ensure fine ventilation.
2. Shut off the machine power on the back of the machine, then connect the power.
3. Turn on the power switch, when heard “DU” warning tone,shows the power is connected.
4. Press the total power switch on the front of the machine then it start to work after three minutes
on the VFD display starts twinking, when first time run this machine, 2 lights at the bottom of water level
bright. After the machine works for a period of time( first time runs, need more 24 hours) when the 5 lights at the
bottom of the water level all bright, now you can press cooling button, starts to cool and
twinkle, after the water
temperature reach the set temperature ,
shows bright.
Remarks: you can press cooling button to stop cooling when you don’t need cold water, which can improve the ability of
producing water.
5. Cold water temperature setting: Press the tempe and – can adjust the cold water temperature.
6. Drinking the cold water:
Press the
cold water outlet switch, can get the cold water.
Press again the
cold water outlet switch, stop the cold water.
7. Press the C/F can change fahrenheit to centigrade temperature.
8. This machine can be connected with the tap water directly.
Remarks: when the ambient temperature is below 38 degree, the machine stop producing water. Please outlet the
purified water so that can clean the filter and machine.
