Please start browser configuration-event-alarm Input.
1. Click “Arming schedule”-select all-then click blue color bar to adjust time period and
save.
2. Click “Linkage Method”, select the method that user need, support upload to SMPT,
FTP, Alarm output (IO output).
10. Video
Stream Type: This dropdown box allows the user to select “tri stream” or “single stream”
a. Tri stream: 3 streams are workable.
b. Single stream: Only main stream is workable in any situation.
Codec: This dropdown box allows the user to set the resolution. The system supports
various resolutions and they can be selected from this dropdown list.
H.265+: H.265+ could 50% bitrates than H.265. It could be used when your NVR support
H.265+, It could also be used when recording to SD card or local storage. H.265+ must
be enabled for cloud recording.
Framerate: This dropdown box allows the user to select a frame rate. Frame rate settings
are measured in frames per second (FPS), and can range from 1f/s to 20f/s in NTSC mode
in 4K resolution and 1f/s to 30f/s in NTSC mode in other resolution.
