Power Source
DC12V±10%, 700mA
Dimension
￠
131 x 93(H) mm
Weight
800g
*
Stated maximum IR range is based on ideal conditions in typical
outdoor environment. Actual range and image clarity depends on
installation location, viewing area and light reflection / absorption
level of object.
Trouble Shooting
a. No picture or only black and white picture after
applying power
(i) Check all plugs and cables are securely connected
to the proper connectors.
(ii) Ensure your power supply is providing the correct
voltage and current.
(iii) Ensure switch the camera video output mode to
correspond your DVR video type.
(iv) Ensure your AHD DVR is 1080P or 1080N, CVI and
TVI DVR is 1080P.
b. The picture has ripples
(i) Check to see if the power supply is experiencing AC
ripple, if so a filter may be required.
(ii) Determine if the monitor is faulty.
(iii) Determine if other peripheral equipment is causing
ripple and if so make the necessary adjustments.
c. The picture appears smeared
(i) The power supply voltage level may be unstable,
therefore, try another power supply.
(ii) Ensure the cables are correctly connected and/or
the cables are of the correct impedance.
